MR2 SpyderChat banner

Search results

1-20 of 200 Results
  1. one last wheel/tire/offset question

    Performance Modifications
    hmm, why would you recommend not going with a 225/50r15? I know it has a taller sidewall but just wanted to know why you wouldn't recommend that. Just curious, looks like 16" on all corners with 225/45 and 245/45 is my best bet. I can't really find anything better. I might go 0 offset in the...
  2. one last wheel/tire/offset question

    Performance Modifications
    The reason im not concerned with wheel bearings is the car is only a weekend toy and spends most the other time stored on a rack. The effects you describe sounds like toe issues and scrub problems(braking) Almost all the widebody spyders are running low low offsets close to 0 I believe in the...
  3. one last wheel/tire/offset question

    Performance Modifications
    Imagine body panels not being an issue and wheel bearing failures non existent. Does anyone know from experience if running a 0 offset wheel causes Any negative issues with handling? My only concern is scrub radius. That also leads to my second question would a 245/40 be better on a 8" or 9"...
  4. widebody vs flares, in terms of performance.

    Performance Modifications
    If you had to guess the width of these flares what would you think they would be? http://uploads.tapatalk-cdn.com/20140704/gy9u4ese.jpg I'm guessing 2 inches. These are about the width I'm looking for.
  5. widebody vs flares, in terms of performance.

    Performance Modifications
    Would any of you have experience between running a widebody and running flares? I know the widebody would offer wider stance and maybe better areo at the cost of a lot of extra weight. Proper flares offer the same stance width with less weight and a mild areo advantage. I would love to hear...
  6. FS: VIS Racing GT Front Bumper

    Parts and miscellaneous for sale
    ^^ dont know if the seller is still selling. Haven't heard back from my pm. Although I'm probably being impatient.
  7. FS: VIS Racing GT Front Bumper

    Parts and miscellaneous for sale
    Do you still have this thing? I could pick up locally. If so pm me. Ill pm you also.
  8. Soft Top Delete brackets

    Parts and miscellaneous for sale
    I want a set for sure, I was going to hack up my top but didn't want to.. I PM'd you so let me know.
  9. K Series Engine Swap Research

    Performance Modifications
    lol and you gave me crap for lack of a bezel !!! :) LMAO
  10. K Series Engine Swap Research

    Performance Modifications
    It is fully functional, just waiting to do the Kswap this spring.
  11. K Series Engine Swap Research

    Performance Modifications
    ;) Hope to have the bezel done by end of October.
  12. K Series Engine Swap Research

    Performance Modifications
    What solution are you using for the cluster?
  13. K Series Engine Swap Research

    Performance Modifications
    Just thought I would say, I'm still alive.. ! Once I get that A/C bracket I'll be starting my swap next spring. Then I'll update this first thread page with all that I find out as I go. Sorry I haven't been updating it Just don't like posting things I haven't been able to put my hands on. Once I...
  14. Fuel Sending Unit - Resistance question

    Performance Modifications
    Is it me or is the factory service manual wrong here? It says there is a 5 pin connector on the fuel pump assembly. It says pins 2 and 3 of the connector on the pump should read 16ohms full (float all the way up) 192ohm Empty (float all the way down) When I physically put a multimeter to...
  15. WTB: Heater Controls Prefer 03+ but will take pre 03 for good price.

    Parts and miscellaneous for sale
    Hey guys, Looking for a climate control unit out of a 03+ spyder for a good price. Also would be willing to take pre 03 if its cheap enough. pm me price. Thanks
  16. WTB: Gauge cluster

    Parts and miscellaneous for sale
    Anyone have a gauge cluster laying around. I have paypal and am verifed
  17. Spyder owners, does your coolant gauge stop working when the factory ecu is removed?

    Performance Modifications
    Is this thing arduino based?
  18. Spyder owners, does your coolant gauge stop working when the factory ecu is removed?

    Performance Modifications
    If what you are saying is true, then this is exactly what the Spyder's need to complete a plug and play K-Swap, the only major issues holding up wiring is A/C and Temp gauge. If this is some how a multiplex conversion box that will allow the A/C to work and temp gauge then you have brought us...
  19. FS: Front Bumper

    Parts and miscellaneous for sale
    How did you fill in the corner lights? You use plastic welding? Also how did you delete the dimples. Thanks
  20. Innovative K Series: Mount issues

    Performance Modifications
    Could you give us a quick run down of the order you do the mounts. Maybe its something with the order in which they are installed. Just wondering becuase a few people have had issues. I am hoping to start my swap this coming spring. I know for a fact my spyder has not been in any type of wreck...
1-20 of 200 Results
Top