MR2 SpyderChat banner

Search results

1-20 of 62 Results
Advanced Search
  1. Corky's RLCB for sale (incompatible with Moroso oil pan) $150

    Parts and miscellaneous for sale
    Does it fit with a K24 swap?
  2. MIM (MoltenCore Intermediate Module) For Working Dash In All Engine swaps.

    Performance Modifications
    When will these will be added to the package options?
  3. Parting Out: 2000 Mr2 spyder. SOCal

    Parts and miscellaneous for sale
    There is an exhaust hanger bushing that is bolted onto the back side of the rear crash bar. My car came in with one missing. Do you have the bushing with the bracket?
  4. Braum FIA side mount seat fitment with pictures

    Appearance Modifications
    https://www.braumracing.com/product/elite-r-series-racing-seats-black-cloth-white-piping/ They fit good when I test fit them but took them back out until the rest of the interior work is done.
  5. Braum FIA side mount seat fitment with pictures

    Appearance Modifications
    Good choice. I went with Braum seats also. I like the quality of the seats and the rails they sell.
  6. Clicking noise from brakes

    Care, Maintenance, and Troubleshooting
    Just like in Ford there is MicroCat, SnapOn CPD and Catalog Advantage. It just depends on what catalog they use. There are companies out there that buy of old obsolete parts from manufacturers when they stop carrying them. CJ Pony is a good example when it comes to Mustang parts. You might be...
  7. Sparco R333 seats in Spyder

    Appearance Modifications
    I set them in the car briefly then pulled them back out. I have to put in my hard dog roll bar, relocate the battery and repair a bullet hole in my firewall (seriously a bullet hole) before I swap in a K24A2. No pics of it but they fit. I should have waited until everything else was done...
  8. Sparco R333 seats in Spyder

    Appearance Modifications
    Braum has some listed as being for a pair and some are listed as each. The Sparco seats are more than Braum are here. I got the ones with the huge bolstering in the seat base. https://www.braumracing.com/product/elite-r-series-racing-seats-black-cloth-white-piping/
  9. Sparco R333 seats in Spyder

    Appearance Modifications
    They look cool but pricey. https://www.sparco-official.com/en/r333.html Have you considered the Braum seats since they offer a bunch of similar stuff and they actually support the Spyder by offering seat tracks made for our vehicle? http://www.braumracing.com/universal-racing-seats/ I bought...
  10. Clicking noise from brakes

    Care, Maintenance, and Troubleshooting
    I would say World Pac would have it but you will need a business license and an account set up to purchase from them (often cheaper that the dealership). Also you could try putting the impact screws back in the rotors to help lock them in place in case the noise is coming from them moving under...
  11. New Ecoboost 1.5L dragon swap

    Performance Modifications
    My only concern is the high pressure pumping system (if GDI), all the solenoids, control valves, sensors, etc that are on the newer Ford engines. It is insane how much tech they require to run correctly. Friends who are still working in Ford dealerships complain about all the nonsense they...
  12. Performance

    MR2 Spyder Main Forum
    Any conversion is going to run well beyond what you are looking to spend budget wise. Just look for another low mileage unit from here or an import from Japan.
  13. New Ecoboost 1.5L dragon swap

    Performance Modifications
    I would avoid the Ford hype on the new Dragon engine until it has been out a while. They aren't exactly kicking ass on the build quality and recall numbers.
  14. New Ecoboost 1.5L dragon swap

    Performance Modifications
    If you meant the 4 cylinder 1.5L ecoboost then Ford has had numerous issues with the 1.5L motor. The DS7Z-6006-D having issues with defects at the edge of the cylinder walls, overheating and other issues. The motors were on backorder at one point. That number has been replaced numerous times and...
  15. Clicking noise from brakes

    Care, Maintenance, and Troubleshooting
    Remove the scaling rust from the caliper brackets before putting on the new hardware and get the OEM hardware. While you are at it make sure the caliper slide pins aren't binding up.
  16. Powdercoating wheels and braces

    Care, Maintenance, and Troubleshooting
    I haven't seen any issues when done on frames and other parts with hotrods. I guess like painting it depends on the prep work and how think or thick it was put on. A friends Exocet car and been well abused and the skeleton on it looks great still.
  17. Powdercoating wheels and braces

    Care, Maintenance, and Troubleshooting
    Good choice on the powder coating. Holds up so much better than painting parts. I had a bent rim on my Mini so I got it repaired and the wheels redone so that I could keep the Works wheels looking good. Well worth the cost and effort.
  18. F/S: Addco Rear Sway Bar, New

    Parts and miscellaneous for sale
    I need to upgrade my front and rear bars but I have no experience with Addco. Might hit you up after I get a chance to do some research.
  19. New Hood CF Lotus style

    Appearance Modifications
    I emailed the place you got it from and asked if they were going to offer one that allowed for a strut brace. Hopefully they have a solution in the works. I wanted to use their version as it would allow for mounting a heat exchanger under if for a liquid to air intercooler setup. Other than...
  20. k24 Swap all Turbo’d Up from MWR

    Performance Modifications
    By the fast spool up time I will assume it is a ball bearing version from Garrett. I have been looking at one of them for my K24A2 build as well because of past experience with them. Garrett offers a ton of variations in those things.
1-20 of 62 Results
Top