MR2 SpyderChat banner

Search results

1-20 of 67 Results
Advanced Search
  1. Rear Crash Bar Feeler

    Member Market Place
    Hey guys, I know someone who is willing to make us a rear crash bar similar to the Noob's crash bar. I understand that Phattires has a jig to make some but he seems to be swamped with other work and the rear crash bar project has been on hold. If we can get a group buy on the rear crash bar...
  2. Coil over suggestions?

    Performance Modifications
    Depends on what you want to do with the car. The same question has been asked multiple times, do a search and figure out what you really want from the suspension.
  3. Kill switch?

    MR2 Spyder Main Forum
    As stated above, it is highly unlikely that your car will be hot-wired and stolen. If the immobilizer isn't enough for you, you can wire in a switch in series to the battery ground and switch off the battery whenever you leave the car. This will make it so that the battery can't supply power...
  4. Softer suspension plus more ride height

    Performance Modifications
    Buy a new car if you want lush smooth ride, the MR2 isn't it. You can stiffen up the ride by adding poly bushings and a better damper/shock.
  5. Dash light color change

    Appearance Modifications
    do a search, it has been posted on here before
  6. Dont shout at me

    MR2 Spyder Main Forum
    Don't use the turbo you have. But if you want you can get a ebay kit, I think it runs around $680 USD which will give you a starting point. Then you can get a cheap T2 or T3 turbo to match the manifold provided in the kit and get larger injectors. AngelPaws has successfully ran a turbo with...
  7. Should I get a spyder?

    MR2 Spyder Main Forum
    If you want something that is practical, the MR2 isn't it. A used 350z would definitely work better as someone else had suggested.
  8. UD Underdash Subwoofer Box

    Parts and miscellaneous for sale
    Guys, this thread is 7 years old.
  9. EMS4 owners discussion

    Engine Management
    is there a reason as to why you didn't stick with the boomslang harness? in one of your posts, you mentioned programming and wiring nightmares but is there anything specifically about the harness that has issues or perhaps it is quality related?
  10. Question about widening factory OEM wheels?

    Suspension and Handling
    I'm not sure if I am understanding your question correctly, but looking for wheels for the MR2 isn't hard? The Miata runs the 4x100 bolt pattern and so do older Hondas. Wider wheels have been installed before, the widest I've gone is 7.5 with the oem lotus wheel with 225/45/17 tires on the...
  11. Parts and repair

    MR2 Spyder Main Forum
    If you can find a decent one with lower miles and a history of being well taken care of it isn't so bad. But this car is old and parts are more scarce now. Realistically it'll be cheaper to own an earlier model Civic because there are so many of them and parts are all over the place and...
  12. Oem Lotus wheels

    Parts and miscellaneous for sale
    Yes tires are still mounted on the wheels.
  13. Oem Lotus wheels

    Parts and miscellaneous for sale
    bump! new year new (used) wheels!
  14. Oem Lotus wheels

    Parts and miscellaneous for sale
    Yea I kinda forgot about them, now they are just taking up space. Tires are basically shot. They are usable, but I'd suggest replacing them.
  15. Oem Lotus wheels

    Parts and miscellaneous for sale
  16. Oem Lotus wheels

    Parts and miscellaneous for sale
    bump....possibly willing to ship if buyer pays for shipping/handling.
  17. FS: Style/Roll bar

    Parts and miscellaneous for sale
    I actually think that it won't fit because it would share the same mounting as the side strikers for the hard top.
  18. Tire/wheels for getting feet wet in SCCA autocross

    Autocross, Racing, and Motorsports
    If you just want to give autox a try, just compete in Novice class if your region offers it. Any car can compete in the class and you can see if you really like it or not, while just competing with your car as-is. You won't have to worry about classing or any of the mods that you currently...
  19. 1ZZ Turbo Build Questions

    Performance Modifications
    What many will say is that HP doesn't destroy stuff, torque does. There are a few "stock block" 1zz turbos that have around 250 whp. I believe for that power rating the fuel pump is sufficient but injectors will need to be changed. The consensus of an intercooler is usually an air to water...
  20. Valve Cover Hydrodipped

    Appearance Modifications
    The process of hydrodipping is basically applying a film onto a surface. Just like wrapping something, when you dip the part in it pulls the film onto the surface and is used up. There is sometimes residual film around but that is usually pushed away after the part has been successfully...
1-20 of 67 Results
Top