MR2 SpyderChat banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Performance Modifications
    I have recently made up my own intake tubing out of steel and after installing this behind the battery with the MAF all glued in and cable tied down to ensure it seats correctly, an ECL now comes up. I have put this down to cold starts as I have been clearing and observing when it comes up. The...
  2. Care, Maintenance, and Troubleshooting
    Hi guys. I am trying to troubleshoot a poor throttle response issue on my '02 Spyder (completely stock drivetrain) with ~ 180K miles. I have a list below of work that I have done to freshen the engine since I bought the car (these things weren't really done to address this particular problem)...
  3. Parts and Miscellaneous for Sale
    Pulled from my 2002 Spyder @ 120K miles, priced to help someone solve a problem on a budget rather than putting parts in the trash. :) 1ZZ Coil Packs - $50 for all 4, shipped anywhere in the USA 3 are good, 1 caused a slight stumble on cold idle. I don't know which one was the problem and...
  4. Performance Modifications
    I bought Che's resonated center exit exhaust a few months ago. Installed it and noticed car looses power around 2-3k rpm. RPM needle stalls at 3k rpm then slightly drops then it starts rising again. It basically sounds like an automatic transmission struggling to shift. Maybe loosing pressure or...
  5. Performance Modifications
    I was researching what to buy to do the MAF mod, and I came around this website selling what must be individual used yellow 310cc injectors for about $30 a pop. http://www.monkeywrenchracing.com/product_info.php?products_id=1533 I was wondering if anyone had bought these or knew if...
  6. Performance Modifications
    Hi everyone I'm about 1-2 hours away from installing the MAF mod. I've searched around for a couple different answers/tutorials on changing injectors. I now know how to properly relieve fuel pressure: pull fuel pump fuse, let the car run until it dies, remove the fuel cap. Of course, before all...
  7. Performance Modifications
    Before you yell at me, i have seached for this and havent found what i was looking for, I am the new owner of a 2000 Mr2 and other than the per-cat gutting, it is bone stock, from advice from various members I have decided to upgrade my intake and exhaust and do the "MAF" mod. I'm sorry to...
    maf
  8. Care, Maintenance, and Troubleshooting
    Hello everyone. I swapped after market intakes from cold air to short air intake. After everything is done, I go inside to start the car and the car wouldn't hold after start. Starter turns fine, Engine fires up like normal but than it doesn't hold but dies like it does when we twist the key to...
  9. Care, Maintenance, and Troubleshooting
    Got a bunch of misfire codes today, so I went to clean the MAF. As I was putting it back on, I noticed one screw just spins & doesn't hold. The screw is fine, but the hole is stripped out. No idea how long its been that way. Do I need to replace the air filter box thingy (not sure what to call...
1-9 of 9 Results
Top