MR2 SpyderChat banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. The Library - Reference and How-to's
    Will a 2 wire knock sensor with the JDM ECUs or a 1 wire sensor to work the US ECU (2002) I’m trying to figure out a way to use the same knock sensor for my JDM ecu for fun driving while being able to swap ECUs to a USDM for inspections.
  2. Care, Maintenance, and Troubleshooting
    Hello everyone , I bought my first Toyota MR2 (ZZW30) a couple of days ago ,so far no issues but I've checked the oil and it's very low under the mid point on the stick , I contacted the previous owner about the issue and he replied that he never filled the oil all the way up to avoid...
  3. Care, Maintenance, and Troubleshooting
    So I had a code P0440 a few months ago and I finally came around to replacing the fuel tank valve / gasket. The next day, however, the check engine light still came on. Before replacing, every other time I went to go get the car scanned, it usually said that the gas lid was the problem...
  4. Care, Maintenance, and Troubleshooting
    I have the transmission removed (replacing with a 6sp) on my 2000. While it was off, I replaced the rear main seal, got a new flywheel (cheaper than refinishing, believe it or not), new clutch pressure plate. While I have the tranny out, anything else that I should consider replacing or...
  5. Care, Maintenance, and Troubleshooting
    Hey guys! Long time lurker here and I finally got myself a MRS with 185k miles. Anyways onto the problem, my MRS has been getting the dreaded P0300 codes after 500 miles after the purchase of the car. The car was throwing P0300, P0302 and P0304 codes and has since hesitates on idle. I have...
  6. Care, Maintenance, and Troubleshooting
    Hey everyone, just got done messing with my timing chain tensioner for the 5th time this month, and while I was under the car I did some more looking and found two things I wanted to ask anyone who might know. 1. Forgive my ignorance, I don't know alot about suspension, but is this a tie rod...
  7. Care, Maintenance, and Troubleshooting
    2003 6-SMT just put in a K&N cold air intake and checking out some maintenance issues since i was gone for a year in afghanistan. I feel retarded for asking but i must....Where in god's(or satan's) name is the transmission fluid dipstick for my 6 speed SMT?...a picture would be awesome but i...
  8. Care, Maintenance, and Troubleshooting
    There is lots of good info on here about what brands / types of fluids to use or not to use, but it is spread out over numerous threads. Having it in one spot would be nice. Be sure to include any conditions like for street/autox, dry climate, etc. or pros/cons too. engine oil manual...
  9. Care, Maintenance, and Troubleshooting
    Hey all, My car did not come with the "Scheduled Maintenance Guide" or the "Owner's Manual Supplement" from the previous owner. Does someone have a PDF(or could make one) of the important pages they could send me? My MR-S is almost to 70k and i am pretty sure i am past due for some...
1-9 of 9 Results
Top