MR2 SpyderChat banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Performance Modifications
    I have recently made up my own intake tubing out of steel and after installing this behind the battery with the MAF all glued in and cable tied down to ensure it seats correctly, an ECL now comes up. I have put this down to cold starts as I have been clearing and observing when it comes up. The...
  2. Care, Maintenance, and Troubleshooting
    Hey everyone! Since I was not able to find any write up or video on changing the intake manifold gasket on the 1zz (specifically in an MR2 Spyder) I decided to do a write up myself! Disclaimer: This is my first time doing this job and probably is not the best way to do it, but I am open to...
  3. Care, Maintenance, and Troubleshooting
    Just as the title suggests, every now and then my engine throws the P0171 and P0174 codes, which state that I'm running lean on banks 1 and 2 respectively, and then the codes disappear without me clearing them. I've already cleaned the MAF but the codes are still appearing. When I scan it using...
  4. Care, Maintenance, and Troubleshooting
    I am pretty sure I have figured this one out, but thought I would get a second opinion as well as throw it up in the forums. After getting my PPE-Cat, I went out and bought a code reader, a few spark plug de-foulers, and got PPE to send me their inline resistor. Well, now that the ECU has...
1-4 of 4 Results
Top