MR2 SpyderChat banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 14 Results
  1. Care, Maintenance, and Troubleshooting
    Hello! I seem to not be able to find the part number (or the part online in general) for the Throttlebody water bypass/escape hoses (the two hoses connecting under the throttlebody). Does anyone have a link/part number? [To clarify, this is for the Manual Throttlebody, NOT the SMT Throttlebody]
  2. SMT
    Hello SMT owner: It seems like the new version of SpyderChat prohibit editing the main thread of each posts, and I am not sure why they move my original posting into "off-topic". It was a regular day and I can not start the vehicle. The battery and starter works fine, fuel pump is OK. The OBD...
  3. Parts and miscellaneous for sale
    2003 MR2 Spyder (SMT 6-spd) parts for sale, sell everything for $395, or parts as listed: 1- Shift and select lever shaft assembly, $95. 2- SMT shifter (no shift ball or boot), $95. 3- SMT throttle Body with throttle position sensor, $90. 4- Engine control module* 1ZZ-FE SMT, $30. 5-...
  4. Parts and miscellaneous for sale
    Anyone have a corolla/Matrix XRS throttle body for sale?
  5. Engine Management
    Hi. I have the following swap: - Car: 2000 MT Mr2 Spyder. - Engine: 2ZZ 2004 AT (with yellow injectors). - ECU: 2ZZ MT (Unknow year, part number: 89666-20060) - Transmission: 5-Speed MT (1ZZ). - Wiring Harness: 1ZZ with cables mods (vvl, etc). But I have problems when accelerating. Should I...
  6. Parts and miscellaneous for sale
    These are the only parts I have left to sell. Take 20% off the listed prices. Will sell all for $525. or make an offer. Motivated to sell. Parts are in good working order. 2003 MR2 Spyder (SMT 6-spd) parts for sale: 1- Shift and select lever shaft assembly, $175. 2- SMT shifter (no shift...
  7. Performance Modifications
    Whats up guys, I'm looking for someone local (California, or anyone willing)who can lend me their 2zz TB. After replacing my IAC valve and that not solving my idle problem I've concluded my TB is the problem. My TB is worn a bit, I had to adjust the lever bolt so it wouldn't stick. I can see...
  8. Parts and miscellaneous for sale
    2003 MR2 Spyder (SMT 6-spd) parts for sale: 1- Shift and select lever shaft assembly, $175. 2- SMT shifter (no shift ball or boot), $175. 3- SMT throttle Body with throttle position sensor, $150. 4- Engine control module* 1ZZ-FE SMT, $50. 5- Transmission control module, 6 speed, $225. 8-...
  9. Performance Modifications
    The TB I have for my 2zz has the crankcase breather hose exit facing the fire wall. What hose did you guys use for this TB? The OEM Toyota one is too short.
  10. Parts and miscellaneous for sale
    Looking for 1zz knock sensor year 2000, the one I bought from here doesn't plug in to my harness, i'm guessing it must be an 03+ 1zz knock sensor. If you have a year 2000 let me know price shipped to 95341. Also looking for reverse light sensor and 2zz throttle body.
  11. Performance Modifications
    Do I need a new one. 2zz TB seems to be worn out, seems to get lightly stuck when closed also. Don't know if this is normal on the TB's. Currently in last steps of 2zz swap, here's some pictures of TB
  12. Care, Maintenance, and Troubleshooting
    Hi guys I had recently had problems with my mr2 with a rough idle cleaned out the MAF sensor and that didnt do much..so i decided to clean my throttle body...and got rid of a thick layer of black dirt .. i put all the parts in and started it up and when it started up it reved to 2k rpm and then...
  13. Care, Maintenance, and Troubleshooting
    hey guys i'm a neeooob to these forums.. i've recently had problems with a rough idle on the mr2.. and usually happens when the car is on a slope. I can't exactly pinpoint whats wrong..i've cleaned out the maf and changed air filter..and got new spark plugs but it still has a bit of a rough...
1-13 of 14 Results
Top