MR2 SpyderChat banner

61 - 65 of 65 Posts

·
Registered
Joined
·
3 Posts
My 2ZZ swap list

SWAP DONE:
Weekends and free time
2/2015 - 3/2015 done mostly by myself with minor help

ENGINE:
USDM 2000 Celica GT-S 2zzge
52,XXX miles (Removed from car with core support damage)

TRANSMISSION:
MR-S 5-Speed
TRD short throw shifter
Aluminum shifter base bushings
Solid brass shifter cable bushings

CLUTCH:
Clutchmasters pressure plate & disc (4 puck un-sprung)
Toyota release bearing
MWR Stainless Braided Clutch Hose
Speed Source Clutch Push Rod

FLYWHEEL:
TRD chromoly (10lbs)

AIR INTAKE:
K&N cut and modified
BLITZ SUS Power T-304 stainless steel air cleaner

HEADER & EXHAUST:
2zz swap header
OEM downpipe (catalytic converter deleted)
Lotus style center exhaust

ENGINE MANAGEMENT:
2000 Celica GT-S ECU
2001 MR-S Engine Harness
MRW conversion harness

GASKETS:
valve-cover
intake manifold
H2O pump & o-ring
timing cover
front main seal
rear main seal

OTHER MODS:
Speed-Source polyurethane engine mounts
Toyota vacuum/fuel rail cover
Lotus coil pack cover
TRD billet oil cap
Monkey Wrench Racing Alternator & h2o Pulley
Non-Stop Tuning Crankshaft Pulley
1zzfe a/c compressor & pulley
Gates serpentine belt (GAT-K060685)
NKG LASER IRIDIUM Spark Plugs (IFR6T11)
OEM Flange Bolts (90105-06293)
TRD 170F Thermostat
Mishimoto 3-core aluminum radiator
Walboro 255lph fuel pump
OEM fuel filter
 

·
Registered
Joined
·
543 Posts
Swap done: Feb 14-16. Done by myself and my old man.
Engine: 2006 corolla xrs, 60, xxx,
Transmission: 6spd same car
Clutch: southbend stage 2 or 1 i dont remember.
Flywheel: stock 2zz
Header exhaust: ebay header stock 1zz dp. Custom exhaust
Intake: ppe short ram
Engine management: 01 celica gts ecu. 6200 lift engage. 8250 redline i believe.
 

·
Registered
Joined
·
26 Posts
Swap done: May 2015 / Done by Chad and Rachel Claborn in one day. Omaha, NE
Engine: JDMEngines in Canada.
Transmission: 6 speed
Clutch: ACT HDSS
Flywheel: Fidanza lightweight
Header & Exhaust: Made our own. Apexi cat back
Intake: Stock
Engine Management, Sensors, Gauges, and other Electronics: Stock stuff
Other: We usually do hybrid ls1/lsx swaps in imports so this was simple stuff
 

·
Registered
Joined
·
19 Posts
Swap done: October 201

Engine: Matrix 18000km

Transmission: Stock Spd

Clutch: New Stock 2zz Clutch

Flywheel: New Stock 2zz Flywheel from MWR

Header & Exhaust: Stock headers, Fabricated Muffler System

Intake: Free Flow 2.5 Filter

Engine Management, Sensors, Guages, and other Electronics: Stock Matrix 2ZZ Auto ECU(For now)

Other: More to come, just did quick swap
 

·
Registered
Joined
·
31 Posts
Swap done: approximately end of September 2015 done by me.

Engine: first was from another community member that ended up being garbage and have me endless problems. Second was from a locally sourced 2003 Vibe GT with 67k miles.

Transmission: 6-speed with quaife lsd...which I'm still questioning actually.

Clutch: ACT hdss

Flywheel: mwr forged steel

Header & Exhaust: ppe

Intake: ppe

Engine Management, Sensors, Guages, and other Electronics: power fc


Other: tein super street coilovers, braided stainless steel brake lines, 6ul wheels 15x8 with 225/45/15 bf Goodrich g force rival s tires.
 
61 - 65 of 65 Posts
About this Discussion
64 Replies
63 Participants
Btyler86
MR2 SpyderChat
SpyderChat Forum is a community for Toyota MR2 Spyder Enthusiasts to discuss specs, reliability and more!
Full Forum Listing
Top