MR2 SpyderChat banner

1 - 7 of 7 Posts

·
Registered
Joined
·
181 Posts
Discussion Starter #1
Does anyone have any experiences in Blitz ZZ-R Damper coilovers?
It would be nice to have some opinions on the ride characteristics and quality.

Those seem to be quite nice, as i might get one set for a good price.
Those are equipped 4/6K springs as standard.

Here is some info from advertisement:

- A single mono tube shock absorber is adopted for all lineup
- 32 way adjustable damper rates
- Ideal for both street or circuit use.
- A large 44mm diameter piston is used (Some vehicles area excluded)
- This damper can be overhauled to maintain prime condition.

STRUCTURE:
A single mono tube design is adopted for the complete range. A large 44mm diameter low friction piston control initial damping, allowing a comfortable ride but a shart driving response.

DRIVABILITY AND COMFORT:
A 32 way damping rate is incorporated into both shock absorbers. With such a wide range of adjustable, driving performance and ride comfort are maintained at the highest level, even at low speed. Spring rate is setup for each vehicle. A comfortable ride can be achieved with the height adjustment function which allows enough stroke for any driving conditions.

STYLING:
The spring sheet and upper mounts are finished in a red alumite. The brackets are finished in a classy matt black. The height adjustment function is shown in millimeters, allowing a wide range of setting to suit any driving conditions.

SETTING:
Preload adjustment of the spring and the height can be adjusted separately. A variety of damping rates can be achieved through simple adjustment. Camber adjustment allows alignment to be set to personal preference.

DURABILITY:
The cylinder case is finished in a black chrome overlay and the bracket is finished in a special point to improve durability and anti-corrosion.

OVERHAUL:
This damper can be overhauled to maintain prime condition.

Here is the photo (i think those would look nice as well, although it is not my priority no. 1):
 

·
Registered
Joined
·
553 Posts
They are pretty cheap. So I wonder if these are just rebadge Megans? Color looks like it.

edit... looks like the price went up on these. I use to see these for 1300.
 

·
Registered
Joined
·
181 Posts
Discussion Starter #3
They are pretty cheap. So I wonder if these are just rebadge Megans? Color looks like it.

edit... looks like the price went up on these. I use to see these for 1300.
Those are for -40% sale in many places at the moment. like ¥94,800 €933.67. Try to google with words blitz zz-r 92787.
 

·
Registered
Joined
·
217 Posts
yeah i quite often see they are on sale... every couple months they are on sale. I wonder if they are actually japan like the more expensive options or just a japan brand made in china. I was thinking about these for mine, but i havent seen too many serious cars using them so cusco or silk road section seem like a better way to go.
 

·
Registered
Joined
·
553 Posts
If those came off the same line as the Megan Racing ones they are made in Taiwan. The company that makes the Megan brand also makes BC and some Apexi coilovers and other brands as well.
 

·
Registered
Joined
·
217 Posts
If those came off the same line as the Megan Racing ones they are made in Taiwan. The company that makes the Megan brand also makes BC and some Apexi coilovers and other brands as well.
Just because they are made in the same factory doesn't always mean they are the same quality though... the factory makes them with the specifications they are supplied with.
 
1 - 7 of 7 Posts
Top