MR2 SpyderChat banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2,266 Posts
Do FA coilovers not have elongated holes on the lower strut mount bracket? I'm failing to see how you could be maxed out at -1 even with just the camber plates.
 

·
Registered
Joined
·
2,266 Posts
Yes they do. I don't understand why either, which is why I made this topic. I reset everything on the front today to make sure it's absolutely maxed out and am still only sitting around -1.5°
My 10 year old BC BR would do more than -2, and my newer S3 coilovers will do a ridiculous amount more. I'm questioning how a newer coilover like FA would give you less. Maybe someone will the same coilovers will respond.
 

·
Registered
Joined
·
2,266 Posts
@k_swap_it

The cut out in your cambler plate seems ... wrong? No reason for it to max out negative cable dead center and have more than it can handle in the positive direction.

EDIT: So even though they marked the coilovers FL and FR they swapped the camber plates? One of the reasons I didn't go with FA is reading all the threads about screwed up coilovers for the Spyder, even if it's an easy/silly problem to fix.
 
1 - 3 of 3 Posts
Top