MR2 SpyderChat banner
1 - 4 of 4 Posts

·
Registered
Joined
·
514 Posts
Discussion Starter · #1 ·
Anyone using 13'' Hoosier with -3.0 degre of camber with crash bolts?

I want to know if anything rubs. I'm at -2.2 with my current setup with camber plates. (new suspension, a review will follow in the next couple weeks)
 

·
Registered
Joined
·
514 Posts
Discussion Starter · #3 ·
That's what I want but can't afford it right now.

Hopefully I will be able to get it next winter.
 

·
Premium Member
Joined
·
4,482 Posts
Anyone using 13'' Hoosier with -3.0 degre of camber with crash bolts?

I want to know if anything rubs. I'm at -2.2 with my current setup with camber plates. (new suspension, a review will follow in the next couple weeks)
Weird thread title...


I had no troubles with clearance. I did not need anything beyond crash bolts. 5-5.25" of BS is the maximum before there starts to be clearance issues to the suspension (not the struts). Depending on the rolling diameter, you will need to limit suspension travel to prevent tire top fender interference. With something like a 20x9-13, even stock suspension should work fine.
 
1 - 4 of 4 Posts
Top