MR2 SpyderChat banner

Front bumper

1K views 6 replies 6 participants last post by  Robertkrafts 
#1 ·
I have always noticed that my front bumper is a slightly different color than the rest of the car. Is this normal? Also what do you suggest I can use to fix this crack?
 

Attachments

See less See more
2
#2 ·
Sun / UV rays affect plastic differently then steel.. you could probably restore it with polishes and wax
 
#5 ·
FYI... my bumper had that same exact crack in that same exact spot - only on both sides, to make matters worse. Opposite this crack is a “clip” as it were, and it helps keep the bumper affixed and stabilized. Since this is a stress area, incidentally, the whole “clip” will eventually break off, and this crack precedes this event.

If I were you I would strongly recommend using some type of crystal clear Crazy Glue or epoxy to keep this piece in place, because once the piece separates and flies away, it’s quite unsightly.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top