MR2 SpyderChat banner
1 - 20 of 22 Posts

·
Registered
Joined
·
311 Posts
Discussion Starter · #1 · (Edited)
FS: tensioner, ecu, headers, clutch, engine, trans

Please read - all prices are OBO. Items need to disappear NOW.

1zz tensioner
Price: $40 shipped to US

1zz ECU
Price: $65 shipped to US

Transmission - 120k miles - bad 2nd/3rd gear synchos
Price: $100 + shipping or picked up in Carlisle, PA

Engine - 120k miles - spun a bearing - unsure of damage extent. Aside from that appears in good condition. Engine spun a bearing on 3/26/12 and was parked since then.
Price: $80 + shipping or picked up in Carlisle, PA

Clutch + cover - never used according to prior owner - F1 racing 6 puck unsprung
Price: $100 shipped to US

NOTE: Clutch is from a Celica GTS (2zz). Per my understanding (http://www.monkeywrenchracing.com/extra_info_pages.php?pages_id=18) they are interchangeable with 1zz clutches.
 

·
Registered
Joined
·
311 Posts
Discussion Starter · #2 ·
Clutch pictures:
I do not think the flywheel goes with it. I need to double check and make sure I have another flywheel. If I have a second flywheel buyer gets the whole kit and kaboodle.

I will take the cover off and post better pictures. The parts are at my brother's house and his son is sick so he is going to try and send pictures of the actual clutch today along with the intake.



 

·
Registered
Joined
·
2,143 Posts
1zz / 2zz Clutches are interchangeable, flywheels are engine specific if that helps anyone out.
 

·
Registered
Joined
·
311 Posts
Discussion Starter · #6 ·
Items are located in Carlisle, PA.

Correct flywheels are 1zz/2zz specific. I wasn't certain whether we had a spare flywheel.

Flywheel is NOT FOR SALE.

Again, please note that I am basing all my information on the prior owner. I was told that the clutch was a "ACT stage 3" and not used. There are no receipts and hence I cannot validate any of this. If you need additional pictures please let me know. I will try my best to provide as much detail as I can.

Attached are more pictures of the clutch.







Intake doesn't suck up water. My brother just removed the intake. Tubing is AEM and filter is a K&N. Little dirty but looks good otherwise. I will provide additional pictures as I get them.
 

·
Registered
Joined
·
311 Posts
Discussion Starter · #8 ·
Intake images, please note the rubber coupler shows small cracks and SHOULD be replaced. AEM will generally provide one for free.













 

·
Registered
Joined
·
311 Posts
Discussion Starter · #9 ·
NOTE: I have interested buyers in the clutch and intake. If those sales fall through then I will entertain others.
 

·
Registered
Joined
·
311 Posts
Discussion Starter · #10 ·
Items are still for sale. They are boxed and ready to go.
 

·
Registered
Joined
·
311 Posts
Discussion Starter · #11 ·
Update:

It appears the clutch is a F1 Stage 4 blah blah whatever clutch disc.

 

·
Registered
Joined
·
311 Posts
Discussion Starter · #12 · (Edited)
Intake has been sold

Following parts are still available:

1zz tensioner
1zz ECU
1zz header
1zz mid pipe
1zz/2zz F1 Unsprung clutch
1zz/2zz F1 clutch cover
120k mile 1zz with spun bearing
120k mile 5 speed with bad 2nd/3rd synchros
2zz Elise header

Please make offers, items will be going on eBay shortly.
 

·
Registered
Joined
·
13 Posts
1zz header

Hi,
Is your 1zz header stock ?

Regards,
DoNnuTs

Intake has been sold

Following parts are still available:

1zz ECU
1zz header
1zz mid pipe
1zz/2zz F1 Unsprung clutch
1zz/2zz F1 clutch cover
120k mile 1zz with spun bearing
120k mile 5 speed with bad 2nd/3rd synchros
2zz Elise header

Please make offers, items will be going on eBay shortly.
 

·
Registered
Joined
·
311 Posts
Discussion Starter · #14 · (Edited)
Header is aftermarket, don't know what brand. If you can tell from the pictures more power to you.

Following items still available:

1zz tensioner (unknown whether OEM or not) - see image
1zz ECU
1zz header - see image
1zz mid pipe
1zz/2zz F1 Unsprung clutch
1zz/2zz F1 clutch cover
120k mile 1zz with spun bearing - possible pending sale awaiting buyer to confirm
120k mile 5 speed with bad 2nd/3rd synchros
2zz Elise header

Make offers on everything.

Tensioner:


Header:






 

·
Registered
Joined
·
699 Posts
PM for the tensioner.
 

·
Registered
Joined
·
311 Posts
Discussion Starter · #17 ·
Make an offer on the tensioner. oris98 hasn't responded back to my PM.
 

·
Registered
Joined
·
311 Posts
Discussion Starter · #18 · (Edited)
Updated pricing, I really need these things gone! Everything is open to reasonable offers.

1zz tensioner
Price: $50 shipped to US

1zz ECU
Price: $80 shipped to US

1zz header (don't know the brand)
Price: $80 shipped to US

Transmission - 120k miles - bad 2nd/3rd gear synchos
Price: $125 + shipping or picked up in Carlisle, PA

Engine - 120k miles - spun a bearing - unsure of damage extent. Aside from that appears in good condition. Engine spun a bearing on 3/26/12 and was parked since then.
Price: $100 + shipping or picked up in Carlisle, PA

Clutch - never used according to prior owner - F1 racing 6 puck unsprung
Price: $120 shipped to US
 

·
Registered
Joined
·
311 Posts
Discussion Starter · #19 ·
Updated pricing, I really need these things gone! Everything is open to reasonable offers.

1zz tensioner
Price: $40 shipped to US

1zz ECU
Price: $65 shipped to US

Transmission - 120k miles - bad 2nd/3rd gear synchos
Price: $100 + shipping or picked up in Carlisle, PA

Engine - 120k miles - spun a bearing - unsure of damage extent. Aside from that appears in good condition. Engine spun a bearing on 3/26/12 and was parked since then.
Price: $80 + shipping or picked up in Carlisle, PA

Clutch + cover - never used according to prior owner - F1 racing 6 puck unsprung
Price: $100 shipped to US
 

·
Registered
Joined
·
699 Posts
Would you please to confirm the tensioner is brand new and is OEM (not the aftermarket part) ? From the picture, it shows very old and rusty.. Is this the one that you are going to ship ? Thanks.
 
1 - 20 of 22 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top