[nopantsnopain]

I just bought a hardtop and a hardtop fitting kit... the problem now is i had the back 2 clips installed on my car.. but dont know where the 2 arms on the front should be bolt to... Plz help.

 

[pablo]

http://tuner-deals.com/hardtop-fitting-kit-p-69.html?zenid=5m2h1k25sq8iv1hblpffn72ri2

 

[Green Goblin]

Chrome Brackets left and right (achterste bevestiging)
58395-17020 & 58396-17020

4 torx-screws
90148-60056


Strikers left & right (bevestiging zijkant)
69431-17011 & 69432-17011


two bolts
75599-17010


two bolts
75599-17030


heater cable
82187-17030

 

[nopantsnopain]

Thanks guys

 

[Green Goblin]

At your service.

 

[nopantsnopain]

= = i just found out the kit gonna cost around 1000 nzd.... OMG...

 

[MikeV]

= = i just found out the kit gonna cost around 1000 nzd.... OMG...

Worst case maybe 2/3 of that....

 

[frpilot]

can these pieces be ordered through any USA Toyota Dealer if i have the part number? I need a defroster cable.

 

[MikeV]

can these pieces be ordered through any USA Toyota Dealer if i have the part number? I need a defroster cable.

As far as I know the defroster cable can be ordered from any Toyota dealer. But they may resist, the cables seem to ship from Japan. None of the other parts (other than some bolts) appear to be orderable.

 

[bossman23780]

AKA RAFA has the kit listed in his thread in the commercial sales section and on his site, an PM to him would be my next step if i needed a kit.

http://spyderchat.com/forums/showth...rything-Toyota-Parts-25-off-Sale-Thread/page7

http://shop.totperformance.com/MR-2-HARDTOP-FITTING-KIT-HARDTOP-KIT.htm

 

[nopantsnopain]

thank you everyone for your help. I just bought a fitting kit from ebay for like 500 USD.

 

[MikeV]

thank you everyone for your help. I just bought a fitting kit from ebay for like 500 USD.

Very interesting purchase considering two sellers in the links above sell them brand new for less.

 

[nopantsnopain]

lol. yes, i made the purchase before i saw the reply .. i m in a big hurry to finish up my car. the bodykit is installed and all i am waiting for is fit the hardtop so i can have the car paint.

The clips over the back

The arms

Should be bolt around here but i dont know how.

 

[yz007]

Do you see the square outline on the plastic in you have in the picture? You will need to remove that plastic and notch it out. The black arm will bolt behind there. The original kit came with plastics from toyota already cut out, but those are rare. Here are the original instructions I uploaded awhile back. Hope they help.
http://www.mr2spyder.net/spyderweb/index.php?/topic/2125-hardtop-installation-instructions/

 

[nopantsnopain]

Do you see the square outline on the plastic in you have in the picture? You will need to remove that plastic and notch it out. The black arm will bolt behind there. The original kit came with plastics from toyota already cut out, but those are rare. Here are the original instructions I uploaded awhile back. Hope they help.
http://www.mr2spyder.net/spyderweb/index.php?/topic/2125-hardtop-installation-instructions/

Thank you very very much. It's very helpful. Any color advise for the car? yellow is kind too girly.I m a huge man, 172cm height and 50kg. Thank you.

 

[yz007]

Thank you very very much. It's very helpful. Any color advise for the car? yellow is kind too girly.I m a huge man, 172cm height and 50kg. Thank you.

You're welcome! I don't think yellow is girly. My husband was driving a yellow RX8 when we dated, and I thought it was sexy. It's all in how you rock it. My personal favorite color for the spyder is spectra blue followed closely by white or black. ^_^

 

[SDSUsnowboards]

Chrome Brackets left and right (achterste bevestiging)
58395-17020 & 58396-17020

4 torx-screws
90148-60056


Strikers left & right (bevestiging zijkant)
69431-17011 & 69432-17011


two bolts
75599-17010


two bolts
75599-17030


heater cable
82187-17030

Are those chrome brackets the brackets that go in the back, behind the top?

 

[Green Goblin]

Yes, they are.