MR2 SpyderChat banner
1 - 7 of 7 Posts

·
Registered
Joined
·
2,477 Posts
You can get camber bolts many places from auto parts like NAPA to RockAuto. They should run from $12-$20 each depending on brand and source. Most sources list just 15mm for both the front and rear. But the fronts are 14 MM which none of the parts houses list for a Spyder. You can find 14MM bolts by searching for a Mitsubishi Lancer front 2002-2005. You can also get the bolts from Toyota.

Moog - Front 90474
Moog - Rear 90475
 

·
Registered
Joined
·
243 Posts
Discussion Starter · #4 ·
I bought front and rear camber bolts. My question is.... On the front set up does the camber bolt go on the top or bottom?

The rears are on the top. Is it the same for the fonts too?
 

·
Registered
Joined
·
131 Posts
Yep, top bolts swap out, make sure to get alignment after.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top