MR2 SpyderChat banner

1 - 6 of 6 Posts

·
Registered
Joined
·
32 Posts
Discussion Starter #1
i am having a problem with a high idle, i recently replaced my engine due to pre-cat failure....when i got the engine back from the machine shop, i had a bad tps sensor and replaced it....does anyone have any ideas?? thanks so much guys
 

·
Registered
Joined
·
5,621 Posts
Air Leak Somewhere.. or Tight Throttle Cable.. or Someone Screwed open the Idle Stop Screw..

Cap
 

·
Registered
Joined
·
32 Posts
Discussion Starter #3
The idle stop screw is fine just had the throttle apart...I will check for an air leak tomorrow and the throttle cable tomorrow ...thanks Cap
 

·
Registered
Joined
·
32 Posts
Discussion Starter #4
throttle cable was all good, and so was the screw, i couldnt find a leak anywhere, i am attempting to pull idle air control valve....lets keep fingers crossed
 

·
Registered
Joined
·
5,621 Posts
'Real Spyders' only have TPS's.. SMT Spyders have TPS and APS.. :) ...

Nick.. you don't have an IAC.. it's done in the Throttle Motor..

Cap
 
1 - 6 of 6 Posts
Top