I am about to start pulling parts off my totalled 01. If anyone needs anything, let me know.
Joined
·
602 Posts
Color? Manual or SMT?
I’m looking for a couple body pieces if it is Blue Mica(8M6). I’m also looking for a coolant reservoir if it’s in usable condition.
I’m looking for a couple body pieces if it is Blue Mica(8M6). I’m also looking for a coolant reservoir if it’s in usable condition.
Joined
·
21 Posts
How much for the power steering pump?
Joined
·
101 Posts
I could really use the windshield drip rail and door top trim plus the little piece of trim just beyond (both sides for each) if yours are in decent condition.
Part numbers are:
7550517040 Roof Drip Molding (Right)
7550617040 Roof Drip Molding (Left)
7571117031 Door Window Belt Weatherstrip (Right, Front)
7571217031 Door Window Belt Weatherstrip (Left, Front)
7567617021 Roof Molding Cap (Right, Front)
7567717021 Roof Molding Cap (Left, Front)
I'm also looking for the brackets that hold the small plastic air dams under the car ahead of the rear wheels and also hold up the A/C lines and heater pipes. Less chance they'll be in good condition but hey I can only hope.
Part numbers are:
8871817370 A/C Refrigerant Line Bracket
8743717020 BRACKET, HEATER PIPE
EDIT: Also, the non-power-antenna antenna bezel, again if it's in good condition (if you didn't have the power antenna, of course)
8639217110 ANTENNA BEZEL
Part numbers are:
7550517040 Roof Drip Molding (Right)
7550617040 Roof Drip Molding (Left)
7571117031 Door Window Belt Weatherstrip (Right, Front)
7571217031 Door Window Belt Weatherstrip (Left, Front)
7567617021 Roof Molding Cap (Right, Front)
7567717021 Roof Molding Cap (Left, Front)
I'm also looking for the brackets that hold the small plastic air dams under the car ahead of the rear wheels and also hold up the A/C lines and heater pipes. Less chance they'll be in good condition but hey I can only hope.
Part numbers are:
8871817370 A/C Refrigerant Line Bracket
8743717020 BRACKET, HEATER PIPE
EDIT: Also, the non-power-antenna antenna bezel, again if it's in good condition (if you didn't have the power antenna, of course)
8639217110 ANTENNA BEZEL
Attachments
Joined
·
281 Posts
Sorry, i should have thought to mention color and such. This is a green 5spd.
I have a PS pump, but it isn't working. I was going to look into if they are rebuildable....
RedMercs. Yes, yes and yes. As i haven't really started thinking about prices, make me an offer
Frineis, i haven't decided yet, but I'm leaning towards selling the doors whole. I also need to re-read your msg on something bigger than my phone to digest it all. 😆 Anything on the A pillar is available.
One of the pieces i think you are asking about will probably go on my new 2. I'll have to get pics of those as they are so so shape.
I have a PS pump, but it isn't working. I was going to look into if they are rebuildable....
RedMercs. Yes, yes and yes. As i haven't really started thinking about prices, make me an offer
Frineis, i haven't decided yet, but I'm leaning towards selling the doors whole. I also need to re-read your msg on something bigger than my phone to digest it all. 😆 Anything on the A pillar is available.
One of the pieces i think you are asking about will probably go on my new 2. I'll have to get pics of those as they are so so shape.
FYI I just installed new oem parts of these trim pieces. They are significantly cheaper if you buy them from overseas and some of them you have to buy abroad (discontinued in the States). I don't recall how much I paid, but it was reasonable. I would esp. suggest you buy new door trim. Mine looked like yours and when I pulled them off they fell apart. I also bought the large rubber piece around the windshield. I got em all from Amayama.
Joined
·
101 Posts
@user4574 thanks and sorry for the wall of text haha.
@sacklunch thanks for the tip, I'll check out Amayama. Wasn't sure if they were legit. Toyota's prices are definitely pretty high.
@sacklunch thanks for the tip, I'll check out Amayama. Wasn't sure if they were legit. Toyota's prices are definitely pretty high.
Joined
·
410 Posts
I'll be able to zip through your area on Monday if you're willing to sell the rear subframe, and fuel tank + pump assembly.
Do you still have the precat?
I'd be interested if it's gutted.
Joined
·
281 Posts
Midwest... was this to me? If so, I'm in Knoxville. Nevermind that.. looked closer at map.. i should wake up before posting lol
I have those, but prob a couple months away. I need to pull the engine first.
BTW, anyone close to Knoxville, Big discounts if you are willing to spend a day or more assisting with a 1ZZ to 1ZZ swap ( 2 pulls, 1 install needed)
Joined
·
281 Posts
It has an e-bay header, been on for about 30k with no flange/gasket issues, seems to be a rare/lucky good one. 80 new, so 40 plus shipping if interested
Joined
·
281 Posts
Yes on the visors, will PM you.
No to the soft top latches, my new 2 needs them.
Aftermarket, yes, but other than the header i think I've moved most of them to the "new" 2. I'll have to get back to you on that
Joined
·
647 Posts
I’m looking for the bracket that the console screws into by the shifter if you have it.
Joined
·
281 Posts
PM sent
1 - 20 of 43 Posts
Join the discussion
