[Solennel]

If adding a RMB in there helps in any way (probably not?), I'd be happy to buy one.

Sent from my PC36100 using Tapatalk 2

 

[CeeDapp]

Lets do this

I'll need 5 orders for the RMBs also.

1) Solennel
2)_______
3)_______
4)_______
5)_______


Corky

 

[Solennel]

Lets do this

I'll need 5 orders for the RMBs also.

Corky

Thank you, sir. :thumbsup:

 

[lexus005]

I would like a front and rear in June.

 

[CeeDapp]

I would like a front and rear in June.

I have one FMB that is available now, if you're interested.

Corky

 

[CeeDapp]

I am combining these lists into one.

MSMB
1) Holman
2) Micah22
3) Pturley
4) Pep
5)______



RMB
1) Solennel
2) Lexus005
3) _______
4) _______
5) _______



FMB
1) _______
2) _______
3) _______
4) _______
5) _______




Corky

 

[kingspyder]

I'll take a MSMB and FMB (pending below).

I don't remember if this has been said, is the RMB compatible with the Beatrush mid + rear underpanels?

I assume the FMB is compatible with the front beatrush since it looks like other FMBs?

 

[Solennel]

I believe one of the members in the Beatrush GB had said they needed to mod one or more of the rear panel's bracket(s) slightly and/or add some washers for it to fit over the RMB.

Here we go;

http://spyderchat.com/forums/showth...rums/showthread.php?50304-Corkys-bracing-and-beatrush-panels&highlight=beatrush

Some bracket modding (of the Beatrush's), and washers! What the fitment issue was isn't so clear as it's not expanded upon, and there're no pics. I highly doubt it's anything too serious.

I'll have to see how it goes, though, as I'll have the same combo once I have the RMB. I might try some rubber or foam washers in conjunction with the supplied hardware.

 

[holman]

I am combining these lists into one.

MSMB
1) Holman
2) Micah22
3) Pturley
4) Pep
5)______



RMB
1) Solennel
2) Lexus005
3) _______
4) _______
5) _______



FMB
1) _______
2) _______
3) _______
4) _______
5) _______




Corky

I have to decline.DAMN property taxes.

 

[CeeDapp]

King - I can't help too much with your questions about the underpanels. I just don't have any working knowledge with those items. It does sound like they can be made to fit, I just can't confirm one way or another - Sorry.
Also I have one FMB already to out the door if you are interested in buying now.

Current list.

MSMB
1) Micah22
2) Pturley
3) Pep
4) Kingspyder
5)______



RMB
1) Solennel
2) Lexus005
3) Kingspyder
4) _______
5) _______



FMB
1) Kingspyder
2) _______
3) _______
4) _______
5) _______




Corky

 

[CeeDapp]

Bump!

We need just one more for the MSMBs to get kicked off -_-



Corky

 

[Joe Schmoe]

...if I can get a MSMB, FMB and RMB then I'm in.

 

[pturley]

Bump!
We need just one more for the MSMBs to get kicked off -_-
Corky

I'm afraid I have to, very reluctantly, back out of this. Unforeseen circumstances and all that.

 

[CeeDapp]

05/17/12 List

Current list.

MSMB
1) Micah22
2) Pep
3) Kingspyder
4) ________
5)______



RMB
1) Solennel
2) Lexus005
3) Kingspyder
4) _______
5) _______



FMB
1) Kingspyder
2) v88dx
3) _______
4) _______
5) _______




Corky

 

[Solennel]

...if I can get a MSMB, FMB and RMB then I'm in.

Are you getting in, or no?

Sorry, being antsy!

 

[Zduece]

Any discount on breast plate and front member brace?

 

[Joe Schmoe]

Are you getting in, or no?

Sorry, being antsy!

I'm in if I can get all three. I'm antsy as well - it's a lot of money. I'm only doing this because my hunch is that these wont be available for purchase much longer...if it all.

 

[CeeDapp]

Any discount on breast plate and front member brace?

Sorry no discounts.

I'm in if I can get all three. I'm antsy as well - it's a lot of money. I'm only doing this because my hunch is that these wont be available for purchase much longer...if it all.

As you all notice these braces are taking longer to fill the minimum for the build requirements. I've supported the Spyder, this forum, and these few products for several years now, and I think it may be time to move on.
There haven't been any cost increases for many years, but yet am asked for cost breaks daily. I know it is human nature, and I can't blame anyone for asking, but usually it's the first question posed without any regard to the performance, or benefits of bracing. I think I've maintained a fairly good delivery for these braces, and have tried to keep customers informed of their orders, but things always happen in any business.

This is, in all likelihood, will be the last series of braces that will be made. I can no longer afford the expenses of carrying inventory.

Again thanks to all of you that have made these braces so popular.


Corky

 

[pelinors714]

Sorry no discounts.



As you all notice these braces are taking longer to fill the minimum for the build requirements. I've supported the Spyder, this forum, and these few products for several years now, and I think it may be time to move on.
There haven't been any cost increases for many years, but yet am asked for cost breaks daily. I know it is human nature, and I can't blame anyone for asking, but usually it's the first question posed without any regard to the performance, or benefits of bracing. I think I've maintained a fairly good delivery for these braces, and have tried to keep customers informed of their orders, but things always happen in any business.

This is, in all likelihood, will be the last series of braces that will be made. I can no longer afford the expenses of carrying inventory.

Again thanks to all of you that have made these braces so popular.


Corky

save 1 breastplate for me!!!!! sorry to hear about this, a buddy of mine closed his business as well due to not wanting to deal with people always asking for discounts.... i guess in this economy its going to happen a lot more goodluck to you in the future!

 

[OldMan]

Post Deleted