MR2 SpyderChat banner

Trouble Shooting My SMT

834 Views 30 Replies 6 Participants Last post by  bucketspyder
I have a 2004 mr2 6spd smt with 80k miles and not long ago it stopped moving! The green neutral light is flashing, the smt light is on, and it is beeping. I can seemingly put it into 1, 2, and R but the car doesn't move whatsoever so I'm lead to believe it's stuck in neutral. Here's what I've done so far I have flushed the smt fluid and gear oil, I cleaned off the input shaft speed sensor, and I replaced the clutch with monkey wrenches smt specific clutch kit. PLEASE HELP
1 - 9 of 31 Posts
LMC hey if you run into issues rebuilding your gsa look me up on FB i rebuild the units and they are tested for 2 wks - Thomas Levine
  • Like
Reactions: 1
Yes, I got your instruction sheet and will look for the access plate first chance I get, right know busy looking for apartment for my son, real estate property here in Florida has exploded and rents have almost doubled, have 3 months to find a place. will let you know when I try again to reach that bolt.
I also sell a tester to test the position sensor /read the pressure sensor to w adapter email me [email protected]
Tomas, very cool that you made a tester for the sensors, I have always said Toyota's method was a bit cumbersome, you need 3 arms to work the test. I have been relying only on resistance testing as long as I don't see a flat spot during movement of the arm. I will not be able to verify how reliable this method is until I finish rebuilding and reassembling my GSA.
my manual and how to use vids are too large to share ill get a pic of the tester - stby
Its portable/hand held pwered by batts or pwr brick can measure pressure sensor w adapter cable - manual will show how to calculate the correct outputs w demos in vids Tester is 30 dollars adapter cable is 25 dollars
Very impressive, good job.
Thank you - I've had very happy customers ... its also extremely cost effective and really great for real time diagnostic chasing pressure (hence the 4ft adapter cable) Id be happy to give you the manual its a 1 gig word doc (demo vids) I'm on Facebook or you could email me [email protected]
Thank you - I've had very happy customers ... its also extremely cost effective and really great for real time diagnostic chasing pressure (hence the 4ft adapter cable) Id be happy to give you the manual its a 1 gig word doc (demo vids) I'm on Facebook or you could email me [email protected]
The tester also comes as a freebie w the purchase of a rebuilt GSA
Colorfulness Rectangle Product Font Software
See less See more
Np - im here regardless FB live chat if needed
  • Like
Reactions: 1
1 - 9 of 31 Posts
Top