MR2 SpyderChat banner

1 - 20 of 25 Posts

·
Registered
Joined
·
268 Posts
Discussion Starter #1 (Edited)
Custom spec’d by TurboKits.com, our Billet BatMoWheel T28 journal bearing turbo is not to be overlooked. With the ability to support 400 HP, it’s billet compressor wheel featuring BatMoWheel technology makes more power with better throttle response than comparably sized cast wheel turbos. The unit is subjected to strict quality control standards as well as being component and high speed VSR balanced right here in the USA. Oil lubricated and water cooled, this is the go to direct drop-in replacement for all Garrett GT28RS turbos (and others with a T25 inlet / 5 bolt outlet). Whether you are looking to boost your ride or replace a blown turbo, our Billet BatMoWheel T28 turbo outperforms while costing less. Fully assembled with a 7 PSI actuator, it’s ready to boost your vehicle’s performance right out of the box. We can also get you oil and water lines (for an additional cost) with the turbo. If you are looking to replace and/or upgrade your T28 turbo, take a look. This great turbo is also available as a turbo upgrade option when purchasing one of our kits.

Here is a link to the turbocharger:

http://www.turbokits.com/Turbo_Chargers/Black_Label_Fabrication/Billett_Series/BLF_BatMoWheel_T28_Billet_Turbocharger/1374/







Check out the Toyota MR2 Spyder turbo kit here at this links:

http://www.turbokits.com/Toyota/MR2_Spyder/Turbo_Kits/Black_Label_Fabrication_Turbo_Kit/942/

Feel free to post up here or shoot us a PM if you have any questions. Thanks!
 

·
Registered
Joined
·
268 Posts
Discussion Starter #5

·
Registered
Joined
·
268 Posts
Discussion Starter #6
Don't have our kit but need a replacement turbo? Take a look!
 

·
Registered
Joined
·
268 Posts
Discussion Starter #7 (Edited)
The other week we were busy clocking a bunch of these... take a look!

 

·
Registered
Joined
·
268 Posts

·
Registered
Joined
·
268 Posts
Discussion Starter #9

·
Registered
Joined
·
268 Posts
Discussion Starter #10

·
Registered
Joined
·
268 Posts
Discussion Starter #11
The Holiday Season is here and we can't think of a more perfect gift!
 

·
Registered
Joined
·
268 Posts
Discussion Starter #12


Happy New Year everyone, here's to 2015!
 

·
Registered
Joined
·
268 Posts
Discussion Starter #13

·
Registered
Joined
·
268 Posts
Discussion Starter #14
Here's a picture of us clocking one of these awesome turbos...

 

·
Registered
Joined
·
268 Posts
Discussion Starter #15
Connecting the internal wastegate linkage...

 

·
Registered
Joined
·
268 Posts
Discussion Starter #16

·
Registered
Joined
·
268 Posts
Discussion Starter #17
Happy Friday everyone. Don't forget to vote daily on Facebook, Twitter, and Instagram for us in the FedEx Small Business Grant Contest (click here for the link)!
 

·
Registered
Joined
·
98 Posts
Hey!

Looking at your kit and interested in the kit but with a ball bearing/ quick spool turbo. Have any? Thanks!

BBD
 

·
Registered
Joined
·
268 Posts
Discussion Starter #19
Hey!

Looking at your kit and interested in the kit but with a ball bearing/ quick spool turbo. Have any? Thanks!

BBD
A GTX2860R would be the fastest spooling option for the size of the turbos we run with our kit. Thanks.
 

·
Registered
Joined
·
268 Posts
Discussion Starter #20
Wondering what really goes into one of these bad boys... take a look at an exploded view!

 
1 - 20 of 25 Posts
Top